العنوان: Corrosion performance of dualphase steel embedded in concrete
المؤلفون: Ismail Mohammad
تاريخ النشر: 2010
الاستشهاد المرجعي : Corrosion performance of dualphase steel embedded in concrete Mohammad Ismail [et al]The Arabian journal for science and engineering المجلة العربية للعلوم والهندسة Univeristy of Petroleum and MineralsVol 35 no 2B (October 2010) p p 8190Ismail Mohammad
الملخص: تعرض هذه الورقة نتائج التجارب التي صممت لتقويم أداء التآكل للفولاذ المزدوج المغمور في الخرسانة وقد تم إنتاج الفولاذ المزدوج بوساطة التلدين الداخلي الحرج للفولاذ التقليدي عند درجة حرارة 735c° وقد تمت معالجة عينات الاختبار أوليا في الماء مدة 14 يوما تليها معالجة تآكل متسارع في 35 % محول الكلوريد وماء البحر وقد تم قياس معدلات التآكل باستخدام ASTM G 109 بتقنية اختبار التآكل المعدل Tafel الذي يستلزم السيطرة على الجهد والتيار الكمي إلى جانب ذلك تم استخدام نظام CMS105 للمراقبة الأسبوعية على قضبان الفولاذ المغمورة في حالات مماثلة إن البارامترات التي تم قياسها تشمل جهد التآكل (Ecorr) وتيار التآكل (Icorr) ومقاومة الاستقطاب (RP) ومعدل التآكل إضافة إلى منحدرات Tafel الأنودية والكاثودية BcBa على التوالي وقد أجريت دراسة فحص المعادن من أجل فحص في ما إذا كان التركيب الداخلي له تأثير على تآكل الفولاذ، وقد وجد أن الفولاذ المزدوج يؤدي دورا أفضل من الفولاذ التقليدي في مقاومة التآكل
This paper presents results of experiments designed to evaluate corrosion performance of a dualphase steel embedded in concrete The dualphase steel was produced by intercritical annealing of conventional steel at 735 oC Test specimens were initially cured in water for 14 days followed by accelerated corrosion curing in 35% chloride solution and sea water Corrosion rates were measured using a modified ‘ASTM G 109 tafel extrapolation corrosion test technique’ which entails voltage control and current quantifications In addition the CMS105 system was employed for weekly observations on steel bars immersed in similar curing conditions The parameters measured include corrosion potential (Ecorr) corrosion current (Icorr) polarization resistance (Rp) and corrosion rate as well as anodic and cathodic tafel slopes a and c respectively In order to examine whether the microstructure has an effect on the corrosion of the steel a metallographic study was carried out and it was found that the dualphase steel performs better than the conventional steel in resisting corrosion
الرابط: http://172.16.0.14/Dspace/handle/123456789/5414
يظهر في المجموعات:English Articles

الملفات في هذا الوعاء:

لا يوجد ملفات مرتبطة بهذا الوعاء

عدد مرات زيارة التسجيلة :149
عدد مرات التحميل :0
سجل الدخول لاضافة التعليق او المراجعة

جميع الأوعية على المكتبة الرقمية محمية بموجب حقوق النشر، ما لم يذكر خلاف ذلك